Wash&Shine 66 Real Graphene Ultra Coating 10H+ for motorcycles, cars, trucks, RV`s and boats. Real Nano Coating 1 fl oz. incl. application cloth and sponge.
Whether paint, chrome, metal, plastic or glass, the latest generation of a real Graphene Coating, Wash&Shine 66 Real Graphene Ultra Coating 10H+ nano sealant seals all smooth surfaces. It was designed especially for the use on on your motorcycle and is super easy to permanently coat paint, chrome, metal, plastic, rims and even your leather saddle bags!
The nano sealant gives surfaces a rich, deep shine that leaves stunning reflections and a silky smooth finish, especially on paint and other smooth surfaces.
Wash&Shine 66 Graphene Coating Ultra 10H+ was designed on a Graphene Matrix developed by our in house leading nano specialists. They have harnessed the latest findings in graphene nanotechnology to create an incredibly strong and flexible coating that can be applied to almost any surface.
It’s the all-in-one solution for your bike. Beside for your motorcycle the Graphene Coating can also be used on your car, truck, RV, boat.
1 motorcycle (HD E Glide with hard bags) = 0.3 oz for a full coating incl rims et
1 Car (sedan) = 0.8 – 1oz
Great Lotus Effect
Water, dust, dirt, insects, bugs and other impurities can be cleaned with water only thanks to the CGX nano sealing. The beading effect results in fewer stains and you have a significantly lower cleaning effort.
Long Lasting Result
One application creates a permanent durable protective layer that provides long-term protection for at least 3+ years. Allow the nano-sealing to dry completely for at least 48h before it comes into contact with water again. A 2nd or 3rd coat intensifies the protection enourmously. There should be at least one hour between coats.
Stable Protective Layer
Unlike conventional ceramic prays that last for couple if weeks only and are not real sealants, or regular ceramic coatings which are usually based on SIO2 silica, CGX does not simply harden SI02 but forms an extremely stable Graphene matrix that is up to 100 times harder than steel, yet remains flexible and does not break.
Revolutionary Technology of Wash&Shine 66 Graphene Coating ULTRA 10H+
The Wash&Shine 66 Graphene ULTRA Coating 10 H+forms an organic nano crystal graphene-structure based on it`s unique formulation. The formulation combines extreme protection with high brightness and years lasting hydrophobic effect on smooth surfaces like:
The Graphen Coating forms a 2-5 nm think layer (1nm is a one billionth of a meter!) ultra resistent to impacts like UV Radiation, acids, friction and more.
It reduces friction by +50% and increases the brightness by 50%-75% depending on the different types of paint in the original and clear coated areas.
Due to its contact angle of 108-118° it ensures and ultra hydrophobic effect.
It`s durabitliy has been tested for 36 months. It can technically perform longer than 36 months but we don`t have sufficient test datas for a longer prooven durability.
What are the advantages of a Graphene Nano Coating?
- ULTRA SHINE: You improve the brightness of the surface and make it shine like never before.
- ULTRA HYDROPHIBIC: The water beading so called lotus effect makes it much easier to clean the surface without the need of any additional cleaning product. Even bird dropping, bugs, and harder mud can be cleaned much easier and up to 4 times faster.
- SMOOTH: The surface will improve its smoothness and reduces the damage by friction i.e. by sand particles.
- ADVANCED PROTECTION: The paint surface is isolated and protected by nanocrystalline layers , reducing UV radiation damage, it slows down the aging of paint. It reduces the ability of oil stains, iron powder, and oxidizinglayer to adhere extremly.
- REAL NANO COATING: This is a real Nano Coating not a fancy Si02 overpriced spray which lasts couple of days or weeks only.
The truth between a real NANO Graphene Coating and SiO2 Sprays :
You might have seen all these fancy ads on social media where they promote Hydrophobic Sprays. Almost daily new products and brands popping up. They sell them as nano coating but they are not. Most of them just buy the products and put a own private lable on it. This is the reason why they pop up and disappear within weeks or months. Compared to a real Nano Coating like the Wash&Shine 66 Graphene Ultra Coating, these “wonder” sprays use a little of SiO2 to form some kind of layer, and some them just use some silicon oil to get the water repellant effect and market it as SiO2. No mater what all these “Gurus” tell you: All of them are not a permanent coating, but wash&wax spray which does not protect your clear coat or even the paint.
Compared to what these companies charge for a 8oz sprayer bottle to what effect and duration you get out of it, it`s simply not worth it and money down the drain if you are looking for a coating.
There is a reason why we, as a developing and manufacturing EXPERT in Nano Coating and professional cleaning products for the industrial sector, never came up with such a Spray. Yes we were working on it for more than 14 months but at the end of the day had to state: “If you want a coating get a coating, if you want a real Wash&wax quick wash spray get one without paying for ingredients you won`t need.”
Application of the Wash&Shine 66 Graphene Ultra Coating 10H+ is easy.
1. Thorough Pre-cleaning
Wash&Shin66 Graphene Ultra Coating 10H+ is a permanent coating, so once applied, defects will remain sealed underneath. Therefore, before application, thoroughly clean the surface of dust, dirt, paint defects (e.g., scratches, swirls and oxidation) and residue from polishing oils as well as other sealants. Do a proper paint or surface correction if needed before application! Get help from professional detailers if you cannot do this by yourself. Once fully detailed make sure the surface is completely clean and free of residues!
2. Apply and Remove
Shake bottle well. Put a few drops on the application cloth / sponge. Apply the Graphen Coating in straight, slightly overlapping lines. Approximately 1-3 minutes after application, the “rainbow effect” will turn into a film, meaning the coating is ready for removal.
Using a soft non fuzzing soft microfiber cloth, or any suitable polishing hea, thoroughly wipe the area in small circular motions to remove the coating residue until clear.
3. Check and Allow to Dry
IMPORTANT: Be sure to check the adjacent area to make sure you have not “pushed” the excess coating into other areas.
Allow the coating to dry completely for at least 48 hours before testing the effect with water. The longer it stays dry, the better, as it will continue to cure for about 5 days!
A team of leading chemical engineers and nanotech specialists from America and Germany developed the revolutionary Intellegent Crawler Technology. They worked over three years to create this unique formula: Once applied on the surface by spraying, this innovative technology crawls on the surface and capsules dirt, grime, bugs and all other elements on the surface. This ensures a spotless clean motorcycle within minutes and prevents scratches. Wash&Shine 66 is not only perfect for deep cleaning: Once applied the cleaner leaves a nano thin coat of polymere compounds on the surface which provides an amazing ultra shine on the surface and forms a protective layer, when used more often.
Wash&Shine 66 has been developed by leading chemical engineers over years for professional use. The revolutionary self organizing crawler technology makes motorcycle cleaning easy as never before. It works on any surface and combines scratch free vehicle cleaning, shine care, and protection in a Ready to use All in one product. Thanks to the worlds unique formulation, you can clean and shine your Motorcycle in one step anytime and anywhere.
wash your motorcycle anytime anywhere without water and gain an ultra shine effect.
Forget about using lots of different detailing products to clean your car and get back shine after a cruise. Now, you can wash your motorcycle anytime – anywhere. At home, on the spot and also on the road. And beside the ultimate fast, effective and ultra shine cleaning, no poisonous or environmentally harmful wastewater is passed into the sewer system.
Wash&Shine66 – one product for all surfaces to wash your own motorcycle
As you know, your own motorcycle can get dirty pretty quickly when you’re out on the open road. It can be a magnet for dust, dirt, grime and other elements of nature (including bird droppings).
With Shinykings´ Wash&Shine 66 waterless bike, you can easily clean, shine and protect your bike to make it sparkle just like new! Wash&Shine66 can be used on all Areas of your bike:
- painted surfaces,
- matte paint
- leather seats and bags
Wash&Shine 66 is a ready to use premium product to wash all kind of motorcycles, Scooters and ATV`s.
The one on all ready to use product is suitable for all kind of motorcycles, Scooters, and ATVs.
Before use, please ensure that the surface to be
cleaned with Wash & Shine 66 is dry! Also, do not use on
hot surfaces. Apply immediately, do not allow to dry on the
• In the case of extremely heavy soiling, a preliminary
cleaning should be carried out.
• Wash & Shine 66 Never dilute with water.
• Wash & Shine 66 Use only on dry surfaces.
• Wash & Shine 66 Do not use in direct sunlight.
• Always use clean and dust-free microfiber cloths
(i.e. Shinykings High fiber microfiber cloth).
• Never apply and use on Brake or Disc Brake.
WARNING! May be harmful if swallowed, causes serious eye
irritation. Can cause skin irritation.
ALWAYS KEEP OUT OF REACH OF CHILDREN.
If medical advice is needed, have product container or label at
hand. Read the label before use. If SWALLOWED: Call a POISON
CONTROL CENTRE or doctor if you feel unwell. Wash out mouth
with water. Do not induce vomiting. If INHALED: Remove person
to fresh air and keep comfortable for breathing. Call a POISON
CONTROL CENTRE or doctor if you feel unwell. If EYES CONTACT:
Rinse continuously with fresh water for a minimum of 15 minutes.
Remove contact lenses if present and easy to do. Continue
rinsing. If eye irritation persists, get medical advice/attention.
See Material Safety Data Sheet for further details regarding the
safe use of this Product.
NOTE: SELLER MAKES NO WARRANTY,
EXPRESSED OR IMPLIED, NOR ACCEPTS
ANY RESPONSIBILITY FOR ANY DIRECTOR
CONSEQUENTIAL DAMAGES BEYOND PURCHASE
PRICE SINCE SELLER HAS NO CONTROL OVER
USER`S HANDLING OR EFFECT OF USE.
GERMANY`S MULTI AWARD WINNING – READY TO USE PREMIUM
PRODUCT TO CLEAN, SHINE & PROTECT IN ONE STEP WITH ONE
IN ALL SCRATCH FREE ULTRA SHINYKINGS FORMULA.
CAUTION: Always carry out a preliminary test on an
inconspicuous location before the product